Excavator removing trees and brush on a slope beside a fenced utility site
Wildfire & Forestry Services

Danger Tree Removal

Danger trees are the burned, leaning, rotten and root-sprung trees standing over roads, buildings, fence lines and work sites. We remove and clear them with our guarded machines, and the saw does the bucking, limbing and close work. Based in 100 Mile House, working across the Cariboo and the rest of BC.

The Hazard

What makes a tree a danger tree

WorkSafeBC calls a tree dangerous when it's a hazard to a worker because of where it stands or how it leans, physical damage, overhead hazards, decay in the limbs, stem or roots, or a mix of those. Some people call them hazard trees. Either way, it isn't only dead trees: a live tree with a bad lean or rot in the roots counts too.

Fire makes it worse. A fire can burn out the roots and the soil that anchors them, so a tree that looks solid can come down without warning, in a wind or on a calm day. Burned trees can keep coming down for years after the fire.

The trees to deal with first are the ones that could hit something if they came down: driveways and access roads, buildings, power and phone lines, fence lines, and anywhere people will be working. If a tree is already down across your access, that's emergency response. Call any time and we'll mobilize the same day.

CAT 305 Next Gen excavator clearing trees in the Cariboo
How We Work

How we remove and clear danger trees

We work with the CAT 305 and the John Deere 335P, both fully guarded for forestry work. The machine works each tree from a safe position and puts it down away from the building, the road or the fence.

Once a tree is on the ground, the saw does the bucking and limbing, and the close work around buildings and fences that a machine shouldn't be doing.

On a big property we work from the access in. Roads and driveways first, then the ground around buildings, then fence lines and the rest. Every crew member holds S-100 and S-185, and every day on site starts with a field-level hazard assessment.

The wood gets dealt with in the same pass: decked if it's worth keeping, piled for burning, chipped on site, or loaded out and hauled. Stumps are cut flush or pulled, whichever you want, and we settle that in the estimate.

Assessments

Assessments and who does them

Where work will expose a worker to a dangerous tree, WorkSafeBC requires that the tree is either taken down or assessed by someone who has completed a training program WorkSafeBC accepts. For forestry, parks and wildfire work that means a certified Wildlife/Danger Tree Assessor. When the job calls for an assessment, a certified assessor does it, and the work follows the assessor's recommendations. In forestry work, the province's assessor training says guarded machines shouldn't work among unassessed dangerous trees, so an assessment often comes first.

If a tree is near a power line, call the utility before anyone touches it.

Clients

Who this work is for

Landowners after a fire

Ranches, resorts, woodlots and acreage with burned timber over the driveway, the buildings and the fence lines. See wildfire recovery for landowners for the rest of the job, and post-fire drainage for the culverts and ditches.

Municipalities and regional districts

Trees over roads, trails, parks and public buildings.

Prime contractors and utilities

Clearing danger trees around a work site or along a right-of-way before your crews go in, under your safety program or ours.

First Nations

Danger trees around community buildings, roads and infrastructure, planned and scheduled with the Nation.

FAQ

Danger trees — straight answers

Does a tree need an assessment before it comes down?

It depends on the work. Where work will expose a worker to a dangerous tree, WorkSafeBC requires that the tree is either taken down or assessed by someone trained in a program WorkSafeBC accepts. In forestry work, the province's assessor training says guarded machines shouldn't work among unassessed dangerous trees, so an assessment often comes first. We walk the site with you and sort out what applies before the work is scheduled.

Can you take down trees close to buildings?

Yes. The machine puts the tree down away from the building, and the saw handles the close work. We plan every tree near a structure before we touch it.

Why do you use machines for danger trees?

On burned and rotten trees, the operator works from inside a guarded cab at a safe distance, instead of someone standing at the base of a tree that could fail at any time. The CAT 305 and the John Deere 335P are both fully guarded for forestry work.

What happens to the wood?

Your call, decided in the estimate. Usable logs get decked, and the rest is piled and burned when the rules allow, chipped on site, or loaded out and hauled. Stumps are cut flush or pulled.

Do burned trees have to come down right away?

Not all of them. The ones within reach of roads, buildings, fence lines and work areas should be dealt with first, because a burned tree can fail without warning. Trees out in the bush away from anything can usually wait for a planned clearing.

How much does danger tree removal cost?

It depends on how many trees there are, how close they stand to buildings and lines, how the machines get to them, and what happens to the wood. We walk the site with you, and you get a written estimate with a defined scope before any work starts.

When is the best time of year to take danger trees down?

The ones near roads, buildings and work areas come down as soon as they can. Trees that can wait are often best done in winter. Frozen ground carries the machines onto ground that's too soft the rest of the year, and the work stays clear of the spring and summer nesting window.

Request a site visit

  1. 1.Tell us about the ground — five minutes.
  2. 2.We walk it with you and talk through what's urgent, what can wait, and rough numbers.
  3. 3.You get a written estimate with a defined scope. If we're not the right fit, we'll say so and point you at who is.

Call or text 250-329-7356 to speak directly with the owner. Or send the project through the form and we'll respond within one business day.

WorkSafeBC registered · $5M CGL · Written SMS · S-100/S-185 crews

Call Text